中文版 ENGLISH
  产品分类
  LED面板灯
  LED轨道灯
  LED天花灯
  LED筒灯
  LED手电筒
  LED灯具配件
最新资讯


Engine overheating failure analysis  [2014/7/28]
 
Starter, solenoid switch information:
A look
Found that the temperature is too high or the temperature light kept flashing, to stop and check to see whether the normal cooling water tanks, water tanks, pipes and various joints for leakage. If the inspection found no abnormalities by appearance, you can make up the required cooling water and then continue driving.
Second touch
When the engine temperature is too high, you can hand to touch the pipes and underwater pipe temperature to determine the fault lies. If the temperature difference between two very large pipe, the thermostat can be judged as not working. On the way if purchased less than a moment accessories, emergency thermostat can be removed, replaced immediately upon return to his unit.
Three put
If there is air in the cooling system, the formation of air resistance, so that cooling water is bad, causing the engine temperature. The following practices can be deflated: let the engine at high speed, gently unscrew the radiator cap to just have a gas release, this time there will be some outflow of cooling water along with the gas, so repeatedly, until you feel will be finished until the gas discharge. After troubleshooting, you should replenish the cooling water.
Four red
Vehicles traveling on dirt roads if prolonged or muddy road, there will be some dirt adhering to the radiator, over time, will affect the cooling effect, causing the water temperature is too high. First with compressed air to blow the radiator grille, and then hosed.




[关闭]


LED面板灯  |  高端面板灯  |  LED筒灯  |  LED灯具厂  |  LED灯具加工  |  余姚面板灯  |  led平板灯  |  面板灯安装
Copyright 2014(c) 余姚万泰电子厂 版权所有  技术支持:宁波玖源网络 地址:余姚市兰江街道谭家岭村孤山开发区15号  电话:0574-58226170   网站地图 XML  
友情链接:名站在线 宁波装修公司  真空配件  奉化水蜜桃