中文版 ENGLISH
  产品分类
  LED面板灯
  LED轨道灯
  LED天花灯
  LED筒灯
  LED手电筒
  LED灯具配件
最新资讯


Starter operation and troubleshooting inability to judge?  [2014/7/28]
 
How to determine the starter operation powerless failure: the start switch is turned on, turn the slow starter weakness, driven by engine problems, uneven speed, the engine can not be started. If the cold season, due to the very low temperatures resulting in engine torque overcast large battery capacity drops, then the starter is unable to operate normally. However, when the engine drag torque is not particularly large, the inability to operate the starter, but after some time and can smoothly start the journey, then the battery save electricity. If you save battery power than the foot, well-connected line ministries, engine drag torque are not large, cool cars and hot cars are unable to run the starter, usually caused by a faulty starter.
Remedy: Remove the starter from the car, decomposition checks, such as brush wear off very insufficient spring force brushes should be replaced, should be cleaned dirty commutator motor switch contacts and the contact plate ablation should grinding . If the fault persists, then
Check the excitation winding or short-circuit of the armature winding, whether the process is too Songkuang bearing starter, armature core and the pole is touching, etc., according to the fault condition to repair or replace.




[关闭]


LED面板灯  |  高端面板灯  |  LED筒灯  |  LED灯具厂  |  LED灯具加工  |  余姚面板灯  |  led平板灯  |  面板灯安装
Copyright 2014(c) 余姚万泰电子厂 版权所有  技术支持:宁波玖源网络 地址:余姚市兰江街道谭家岭村孤山开发区15号  电话:0574-58226170   网站地图 XML  
友情链接:名站在线 宁波装修公司  真空配件  奉化水蜜桃